Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 77 / 684

Configuring Management Zone Settings 77
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
4 Fill in the fields:
Š
Setting: Select a value from the Setting drop-down list.
The drop-down list contains all available settings in ZENworks Linux Management. If not
all modules are installed on a device, settings that control that module will not be used by
the zmd daemon. For example, if you do not install the Remote Control module on a
device, all settings that configure this module will be ignored.
Š
Value: If the selected setting requires specific values, select the desired value from the
drop-down list. If the selected setting does not require specific values, type the value in the
Value box.
After you click
OK , if displays next to the Value box, the setting you typed is either too
small/large or you typed an invalid setting.
Š
Description: Displays the description of the selected setting.
The zmd settings can be overridden at the device or folder level. If you add the same zmd
setting to a device or folder, but give it a different value, the new setting value overrides the
inherited zmd setting value. A setting on the device level overrides the same setting on the
folder level, which overrides the same setting on the system level.
To provide a setting at the device level, from the ZENworks Control Center, click the
Devices
tab, navigate to and click the desired device, click the Settings tab, click ZMD Settings , then
click Override Settings . Click the Help icon for additional help.
To provide a setting at the folder level, from the ZENworks Control Center, click the Devices
tab, click the (Details) link next to the desired folder, click the Settings tab, then click ZMD
Settings , then click Override Settings . Click the Help icon for additional help.
If you add the same setting twice, the first instance of the setting is removed and the new
setting is applied to the device when it refreshes.
7.11 Integrating Novell Customer Center with
ZENworks Linux Management
Novell Customer Center is an online tool that makes it easier for you to manage your business and
technical interactions with Novell. From one location, you can do the following:
Š Review the status of supported Novell products, subscriptions, and services
Š
Obtain support
Š Get Linux updates and patches
For more information about Novell Customer Center, see the Novell Customer Center
documentation (http://www.novell.com/documentation/ncc/index.html) .
ZENworks Linux Management helps you to register all SLES 10 and SLED 10 managed devices
into Novell Customer Center at the same time. By integrating Novell Customer Center with the
ZENworks Linux Management server, you do not need to individually register each managed device
to Novell Customer Center.
To integrate the ZENworks Linux Management Server with Novell Customer Center:
1 Install ZENworks Linux Management Agent on all the managed devices. For more
information, see
Setting Up Managed Devices in the Novell ZENworks 7.3 Linux Management
Installation Guide .