Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 614 / 684

614 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
Table D-1
zisview Information
Category Information
Image-safe Data
Š
Version: The version number of the Novell ZENworks Linux
Management Imaging Agent ( novell-zislnx ).
Š
Just Imaged Flag: If this is set to False, the Imaging Agent reads
data from Linux and writes it to the image-safe data store. If this is
set to True, the Imaging Agent reads data from the image-safe data
store and writes it to Linux.
Š
Scripted Image Flag: If this option is set to True, the last imaging
operation was a scripted image. If this option is set to False, the last
imaging operation was not a scripted image.
Š
Last Base Image: The last base image that was restored to the
device.
Š
Last Base Image Time: The time stamp of the last base image that
was restored to the device.
Š
Last Base Image Size: The size of the last base image that was
restored to the device.
Š
Last Base Image Address: The IP address of the last base image
that was restored to the device.
Š
Script Checksum: Displays the checksum value representing the
last script run. The ZENworks Imaging Engine uses the checksum to
prevent the same script from re-running on the device unless you
specify in the ZENworks Control Center that you want to rerun the
same script.
Device Identity Information
Š
Zone GUID: The ZENworks Management Zone that contains the
device, if it has been imported.
Š
Device GUID: The Globally Unique Identifier of this computer’s
device.
Š
Device Index: The device identification number.
Š
Win 9x Computer Name: The computer name for the device.
1
Š
Windows Workgroup: The Microsoft network workgroup of the
device.
1
Š
Windows SID: The Windows Security ID of the device, a unique
number that identifies this device in Windows.
1