Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 522 / 684

522 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
Additional Info: PolicyEnforcer Exception: file does not exist.
39.4 Debugging and Logging ZMD
The ZENworks Management Daemon (ZMD) provides the following preferences that can be used
for debugging and logging ZMD:
Š log-level: Used to set up custom logging levels. The valid values are off, fatal, error, warn, info,
and debug. To set the value of the preference, use the
rug set log-level
‘ preference_value’
command. For example, to set the log-level preference to debug, use
rug set log-level ‘debug’
. For more information about rug, view the rug man page (
man
rug
) on a managed device or see rug (1) (page 586) .
Š
log-soap-xml: Used to log SOAP messages. All messages are logged in the
zmd-
messages.log
file. The file is located in the
/var/log/
directory on SLES 10 and SLED 10
devices, and in the
/var/opt/novell/log/zenworks
directory on all other devices.
For detailed ZMD logging information on SLES 10 and SLED 10, you can also refer to
/var/log/
zmd-backend.log
. For extensive logging of ZYPP, configure the ZYPP_FULLOG environmental
variable.
39.5 Viewing the Debug Logs on ZENworks
Server
The following logs are available on ZENworks Server:
Š
ZENworks Server Logs: The ZENworks Server logs are located in the
/var/opt/novell/
log/zenworks
directory. Each log file corresponds to an individual component or service. For
example, the operations of ZENserver and ZENloader are logged in the
services-
messages.log
and
loader-messages.log
files respectively.
If you want to collect additional debug logging information for ZENworks Server, do the
following:
1. Edit the
etc/opt/novell/zenworks/logger-server-conf.xml
to configure the
following lines:
<LoggerModule trace = "true">
<param name="fileDebug" enable = "true" value ="true" />
2. Restart all the zlm services by using the
zlm-config --restart
command.
If you want to collect additional debug logging information for ZENworks Loader or its
modules, do the following:
1. Edit the
/etc/opt/novell/zenworks/logger-loader-conf.xml
file and the
/etc/
opt/novell/zenworks/logger-server-conf.xml
file to configure the following
lines:
<LoggerModule trace = "true">
<param name="fileDebug" enable = "true" value ="true" />
2. Edit the
/etc/opt/novell/zenworks/logger-log4j-loader-conf.xml
file to
configure any specific loader module as follows:
<logger name=" LocalLogger.ComponentName " additivity="true">
<level value="debug"/>