Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 503 / 684

Setting Up Remote Management 503
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
5 Select the IP address of the device.
6
Select the Remote Management operation to be performed on the device.
The drop-down list of operations is based on the effective Remote Management Settings for the
managed device. The available options are
Remote control , Remote view , and Remote login .
The following table lists and explains all the operations you can select from the drop-down list:
7 Specify the port number configure for the selected operation.
The auto-populated port numbers are those which are configured in the effective Remote
Management Settings for the selected device.
8 Click OK .
9
Read the Java Security message and click Yes to accept the Certificate of the Signed Applet. To
avoid the message to be displayed again, select Always .
10 If the Ask for permission from user on the managed device setting is enabled, click Yes on the
permission change dialog-box on the managed device.
11 Specify the password at the management console, then click OK .
36.4 Starting Remote Management Operations
Using the Native VNCViewer
The following sections contain additional information:
Š Section 36.4.1, “Starting Remote Management Operations Using the Windows VNC Viewer,”
on page 504
Š
Section 36.4.2, “Starting Remote Management Operations Using the Linux VNC Viewer,” on
page 504
Option Description
Remote Control Allows you to take control of the managed device.
Remote View Allows you to view the managed device.
Remote Login Allows you to remotely login to a new desktop session on the managed
device. This desktop cannot be viewed by the users on the managed
device.