Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 641 / 684

ZENworks Imaging Engine Commands 641
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
E.6 Partition Mode (img part)
Use the Partition mode to activate (make bootable), add, or delete a partition on the device.
You can activate, add, or delete a partition using either ZENworks Imaging Engine menu or the bash
prompt.
The Partition mode can be used in two ways:
Š
Section E.6.1, “Using the ZENworks Imaging Engine Menu,” on page 641
Š
Section E.6.2, “Using the Bash Prompt,” on page 642
E.6.1 Using the ZENworks Imaging Engine Menu
1 Enter
img
to display the ZENworks Imaging Engine menu, then click Partitioning .
2 Click Modify partitions , then click an option:
Active: Select a partition that you want to activate (make bootable), then click Active .
Add: Opens the Create New Partition window. Click a partition type, partition size, and cluster
size, then click OK .
Delete: Select a partition, then click Delete .
For more information, see the table in Section E.6.2, “Using the Bash Prompt,” on page 642 .
img session mcast01 m Starts a multicast session named mcast01 and designates
this device as the master. Each successive device that
issues
img session mcast01 before the imaging
begins joins the session as a participant. Imaging doesn’t
start until the master user presses
g .
img session mcast01 master
clients=5
Starts a multicast session named
mcast01
. Each
successive device that issues img session mcast01
before the imaging begins joins the session. Imaging
doesn’t start until one of the users presses
m to designate
himself as master, or until the imaging session is started
from the imaging server by selecting
Manually Start
Multicast , providing the required information, then selecting
Yes . Five other devices must also register as participants
before the session begins.
img session mcast01 master
clients=5 time=20 Starts a multicast session named mcast01 . Each
successive device that issues
img session mcast01
before the imaging begins joins the session. Imaging
doesn’t start until one of the users presses
m
to designate
himself as master, or until the imaging session is started
from the imaging server by selecting
Manually Start
Multicast , providing the required information, then selecting
Yes . Either five other devices must register as participants
or more than 20 minutes must elapse between any
consecutive participant registrations, whichever occurs
first, and then the session begins.
Example Explanation