manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Download Novell ZENworks Linux Management 7.3 IR2 Administration Manual for free from manualshive.com. This comprehensive manual provides detailed instructions on managing your Linux environment efficiently. Get the manual now and streamline your IT operations with ease.

Share
Download
background image

Contents

9

no

vd

ocx 

(e

n)

  

7 Ja
nua
ry 201

0

17.7.4

Editing Text File Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  197

17.7.5

Viewing Policy Enforcement Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  200

17.8 Editing System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
17.9 Refreshing Policies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  202
17.10 Verifying Policy Enforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  202
17.11 Renaming, Copying, or Moving Policies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  203
17.12 Deleting Policies, Policy Groups, and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  204
17.13 Unenforcing Policies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  205

Part V  Package and Content Management

207

18 Package and Content Management Overview

209

18.1 Understanding RPM and File Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  211
18.2 Understanding Catalogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  211
18.3 Understanding Dell Update Package Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  212
18.4 Understanding the zlman Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
18.5 Replicating Content in the ZENworks Management Zone . . . . . . . . . . . . . . . . . . . . . . . . . . .  212
18.6 Mirroring Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  212

19 Understanding RPM Packages

213

19.1 Installing the RPM Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
19.2 Understanding the RPM Repositories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  213

19.2.1

ZYPP Repository . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  213

19.2.2

YaST Online Update (YOU) Repository  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  214

19.2.3

RCE Repository . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  214

19.2.4

NU Repository . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  214

19.3 Understanding the Dependencies of RPM Packages  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  214
19.4 Loading Base Packages  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215
19.5 Patching the Client Systems  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  215

20 Using RPM and File Bundles

217

20.1 Understanding Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  217

20.1.1

RPM Bundles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  218

20.1.2

Preboot Bundles  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  218

20.1.3

File Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218

20.2 Creating RPM Bundles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  218
20.3 Creating File Bundles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  229
20.4 Assigning Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  238
20.5 Editing Bundles  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  241
20.6 Adding Bundles to Catalogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  245
20.7 Creating Folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  245
20.8 Creating Bundle Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  247
20.9 Adding Bundles to Existing Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  251
20.10 Uninstalling Bundles from Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252

20.10.1 Using the Bundles Page to Remove Bundles from Devices  . . . . . . . . . . . . . . . . . .  252
20.10.2 Using the Devices Page to Remove Bundles from Devices  . . . . . . . . . . . . . . . . . .  254

20.11 Deleting Bundles, Bundle Groups, and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  255
20.12 Renaming, Copying, or Moving Bundles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  256
20.13 Deploying a Different Version of a Bundle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  257

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZENWORKS LINUX MANAGEMENT 7.3 IR2

Canon Optura Pi Install Manual preview
Optura Pi
Brand: Canon Pages: 2
MACROMEDIA COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX... Use Manual preview
COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX...
Brand: MACROMEDIA Pages: 90
M-Audio Electric Bass Vol. 1—Rock Quick Start Manual preview
Electric Bass Vol. 1—Rock
Brand: M-Audio Pages: 4
ScanSoft PaperPort Manual preview
PaperPort
Brand: ScanSoft Pages: 33
McAfee VirusScan Plus User Manual preview
VirusScan Plus
Brand: McAfee Pages: 205
Canon 08011-41-UD2-003 Installation And Configuration Manual preview
08011-41-UD2-003
Brand: Canon Pages: 176
MACROMEDIA FLEX Reference preview
FLEX
Brand: MACROMEDIA Pages: 830
Sony MSSW-IC2 User Manual preview
MSSW-IC2
Brand: Sony Pages: 2
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Supplementary Manual preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Brand: Sony Pages: 1
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Specifications preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Brand: Sony Pages: 2
Sony ICD-BP150 - Ic Recorder Specifications preview
ICD-BP150 - Ic Recorder
Brand: Sony Pages: 2
Sony D-NS921F - Portable Cd Player Specifications preview
D-NS921F - Portable Cd Player
Brand: Sony Pages: 2
Sony MS Export User Manual preview
MS Export
Brand: Sony Pages: 9
Sony Music Box v.2.1.0 Manual preview
Music Box v.2.1.0
Brand: Sony Pages: 12
Sony Memory Stick Autorun v1.3 Operating Instructions Manual preview
Memory Stick Autorun v1.3
Brand: Sony Pages: 24
Sony ICD-R100 Operating Instructions (primary manual) Service Manual preview
ICD-R100 Operating Instructions (primary manual)
Brand: Sony Pages: 22
Sony ICD-BP100 - Ic Recorder Service Manual preview
ICD-BP100 - Ic Recorder
Brand: Sony Pages: 32
Sony Image Converter 2 Plus Operating Instructions Manual preview
Image Converter 2 Plus
Brand: Sony Pages: 40

Brands by name

Popular brands

Load more brands