Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual, Page: 597 / 684

Command Line Utilities 597
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
-r, --rebuild - Registers a managed device with the ZENworks server by performing a point-in-
time replacement of the old agent. The point-in-time replacement of the managed device lets
you replace the older device object on the ZENworks Server with the current device object
that is requesting the rebuild. The rebuild operation ensures that all the bundle and policy
associations are retained. The replacement of the device object is based on the alias name
(display name) and the primary IP address of the managed device. This option is not
supported for ZENworks Primary Server and ZENworks Secondary Server.
-o, --option - Set an option. Accepts the following options:
--normal-output - Normal output (default)
--terse - Terse output
--no-abbrev - No abbreviation
--debug - Debug output, prints full exception traces
--quiet - Quiet output, prints only error messages
service-delete (sd) [uri | number | name] [...]
Deletes the specified services. Accepts the following option flag:
--all - Deletes all the services.
-y, --no-confirm - Does not prompt for confirmation.
service-list (sl)
Lists the available services.
service-types (st)
Lists the available service types.
System Commands
clean-cache (cc) [...]
Cleans the HTTP cache.
load-modules (lm) [...]
Loads ZENworks Management Daemon (zmd) modules.
ping
Pings the ZMD deamon running on the client.
restart
Restarts the ZLM daemon. Accepts the following option flags:
-f, --force - Forces the shutdown.
-n, --no-wait - Does not wait for confirmation that the daemon has restarted.
--clean - Cleans up at restart
schedule (sch)
Shows scheduled items.
shutdown [options] [...]
Halts the ZLM daemon. Accepts the following option flags: