Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual, Page: 431 / 684

Using Preboot Services 431
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
4 Select ZENworks Multicast bundle , then click Next to display the Set General Information
page:
5 Fill in the fields:
Name: (Required) Although bundles can be identified in ZENworks Control Center by their
type of icon, as well as the folder they are listed under, you should develop a naming scheme
that differentiates the ZENworks Multicast bundles that are listed together in a folder.
For more information, see
Appendix C, “Naming Conventions in the ZENworks Control
Center,” on page 605 .
Folder: Browse for the location where you want the ZENworks Multicast bundle displayed in
ZENworks Control Center. The folder must exist. You cannot specify a non-existent folder,
because ZENworks does not create them from this wizard.
Description: Provide a description to help you later recognize the exact purpose of this
ZENworks Multicast bundle.
If you are using subsets of an image, be sure to indicate which file set this bundle is configured
for.
6 Click Next to display the Master Image Source page: