Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual, Page: 248 / 684

248 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
For more information, see Appendix C, “Naming Conventions in the ZENworks Control
Center,” on page 605 .
Š Folder: (Required) Type the name or browse to the folder that contains this bundle group.
Š
Description: Provide a short description of the bundle group's contents. This description
displays in the ZENworks Control Center interface and in the ZENworks Linux
Management Update Client, which is the user interface for updating software.
4 Click Next to display the Summary page.
Review the information on the Summary page. Click the Back button to make any changes to
the bundle-group settings.
Depending on your needs, you can create the bundle group now or you can specify members,
assignments, and schedules for this bundle group and configure other options.
5 Click Finish to create the bundle group as configured per settings on the Summary page. If you
click Finish , the bundle group is created but it does not have members, devices assigned, a
schedule, and so forth. At some point in the future, you need to configure additional options for
the bundle group by continuing with
Section 20.4, “Assigning Bundles,” on page 238 .
or
Click
Next to display the Add Group Members page to perform the following tasks:
Š
Specify members for this bundle group
Š
Specify assignments for this bundle group
Š
Set special flags, such as flags to remove conflicting packages and attempt a dry run of the
package installation
Š
Specify the schedule to install or deploy the bundles
6 Specify the bundles to include in this bundle group.
6a Click Add to browse for and select the appropriate bundle objects.
6b Click the underlined link in the Name column to select the desired bundles and display
their names in the Selected list box.
6c Click OK .
7
Click Next to display the Add Assignments page.