Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 528 / 684

528 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
5 Specify a trap target.
You can specify the IP address or DNS name of the management console as a trap target.
6 Specify the port number of the SNMP server.
By default, the port number is 162.
7 Specify the community string of the SNMP trap that is to be sent.
The default value of the community string is Public.
8 Click OK or Apply .
40.2 Configuring Message Logger Settings for a
Managed Device
The following settings of the Message Logger can be configured to log the messages on a managed
device:
Š Section 40.2.1, “Configuring Local Log Settings,” on page 528
Š
Section 40.2.2, “Configuring System Log Settings,” on page 529
40.2.1 Configuring Local Log Settings
These settings allow you to write messages into a local file. The name of the log file for ZMD
logging is
zmd-messages.log
; for ZENloader logging it is
loader-messages.log
; and for ZEN
server logging it is
services-messages.log.
The path of the local log files is
/var/opt/
novell/log/zenworks
.
1 In the ZENworks Control Center, click Configuration .
2 In Management Zone Settings , click Local Device Logging .
3 Under Local File , the Log Message to a Local File if Severity Is check box is selected by
default if you are on ZENworks 7.3 Linux Management. For a new installation of ZENworks
7.3 Linux Management with IR1IR2, this option is deselected by default. If you upgrade to
ZENworks 7.3 Linux Management with IR1IR2 from an earlier version of ZENworks Linux
Management, this option displays the value that you selected before upgrading.
4 In the Log Message to a Local File if Severity Is field, select a value from the drop-down list.
Š
Select Error to store the messages with an Error severity.
Š
Select Warning and Above to store the messages with a severity of Warning and Error.
Š
Select Information and Above to store the messages that have a severity of Information,
Warning, and Error.
Š
Select Debug and Above to store the messages that have a severity of Debug, Information,
Warning, and Error
5 In the Limit File Size To field, specify the size of the file in MB or KB. The default value is 10
MB.
The messages are backed up after reaching the specified size and the file is reset.
6 In the Number of backup files per day field, specify the number of backup files to take per day.
The default value is 1 if you are on ZENworks 7.3 Linux Management and does not change if
you upgrade to ZENworks 7.3 Linux Management with IR1IR2. For a new installation of