Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 608 / 684

608 Novell ZENworks 7.3 Linux Management Administration Guide
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
Š
Section D.1.2, “Opening an Image,” on page 608
Š
Section D.1.3, “Adding a File or Folder to an Open Image,” on page 608
Š
Section D.1.4, “Creating a Folder in an Open Image,” on page 609
Š
Section D.1.5, “Excluding a File or Folder from a File Set in the Open Image,” on page 609
Š
Section D.1.6, “Marking a File or Folder for Deletion in the Open Image,” on page 609
Š
Section D.1.7, “Purging Files and Folders Marked for Deletion from the Open Image,” on
page 609
Š
Section D.1.8, “Extracting a File or Directory from the Open Image to a Folder,” on page 609
Š Section D.1.9, “Extracting a File or Directory from the Open Image As an Add-On Image,” on
page 609
Š
Section D.1.10, “Viewing a File from the Open Image in its Associated Application,” on
page 610
Š
Section D.1.11, “Saving Your Changes to the Open Image,” on page 610
Š Section D.1.12, “Creating an Add-On Image,” on page 610
Š
Section D.1.13, “Adding a Partition to a New Add-On Image,” on page 610
Š Section D.1.14, “Compressing an Image,” on page 610
Š
Section D.1.15, “Splitting an Image,” on page 611
Š Section D.1.16, “Resizing a Partition in an Image,” on page 612
D.1.1 Starting Image Explorer (imgexp.exe)
The Image Explorer utility must be run on a Windows device. You need Samba running on the
Linux imaging server where the utility file is located in order for the Windows device to have access
to it.
There are no command line parameters for the Image Explorer utility.
1 To start Image Explorer, run the following file:
/opt/novell/zenworks/zdm/imaging/winutils/imgexp.exe
D.1.2 Opening an Image
1 Start Image Explorer.
2 Click on the toolbar, browse for and select the image (
.zmg
) file, then click Open .
Large image files might take a few moments to open.
D.1.3 Adding a File or Folder to an Open Image
1 Start Image Explorer.
2 In the left pane, browse to the partition or directory where you want to add the file or folder.
3 Click or on the toolbar, browse to the file or folder, then click Add or OK .