Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 69 / 684

Configuring Management Zone Settings
7
69
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
7
Configuring Management Zone
Settings
The ZENworks
®
Management Zone is the top level of the ZENworks management hierarchy. The
Management Zone provides an autonomous administrative unit of ZENworks Servers and managed
devices (workstations and servers). You use the ZENworks Control Center (the Web-based
administrative tool) to manage devices. The ZENworks Servers and managed devices work together
to apply the management tasks.
You can use the Configuration tab in the ZENworks Control Center to configure your Management
Zone.
The following sections contain additional information:
Š
Section 7.1, “Configuring System Variables,” on page 69
Š
Section 7.2, “Configuring the Device Refresh Schedule,” on page 72
Š
Section 7.3, “Configuring Device Inventory Settings,” on page 72
Š
Section 7.4, “Configuring Local Device Logging,” on page 73
Š
Section 7.5, “Configuring Preboot Services,” on page 74
Š
Section 7.6, “Configuring Remote Management,” on page 74
Š
Section 7.7, “Configuring Centralized Message Logging,” on page 74
Š
Section 7.8, “Configuring the Content Replication Schedule,” on page 75
Š
Section 7.9, “Viewing Default Target Platforms and Configuring Custom Target Platforms,” on
page 75
Š Section 7.10, “Configuring the ZENworks Management Daemon (zmd) Settings,” on page 76
Š
Section 7.11, “Integrating Novell Customer Center with ZENworks Linux Management,” on
page 77
Š
Section 7.12, “Configuring the ZENworks Server Preferences,” on page 78
Š
Section 7.13, “Understanding the StoreFileDeps Preference,” on page 79
Š
Section 7.14, “Cleaning Up Inactive Devices,” on page 79
7.1 Configuring System Variables
The System Variables page lets you define variables that can be used to replace paths, names, and so
forth as you enter data in various ZENworks Control Center fields. System variables defined on this
page can be used on all objects in your ZENworks Management Zone.
System variables can be overridden at the device or folder level. If you add the same system variable
to a device or folder, but give it a different value, the new variable value overrides the inherited
system variable value. A variable on the device level overrides the same variable on the folder level,
which overrides the same variable on the system level.