Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 Administration Manual Download Page 19 | Manualshive

Page: 19 / 684

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 Administration Manual Download Page 19

About This Guide

19

no

vd

ocx

(e

n)

7 Ja
nua
ry 201

0

About This Guide

This

ZENworks 7.3 Linux Management Administration Guide

includes conceptual and task-based

information to help you configure and maintain your ZENworks

®

system. The guide is organized as

follows:

Part I, “Understanding ZENworks Linux Management,” on page 21

Part II, “ZENworks System Management,” on page 39

Part III, “Device Registration,” on page 99

Part IV, “Policy Management,” on page 123

Part V, “Package and Content Management,” on page 207

Part VI, “Preboot Services,” on page 323

Part VII, “Hardware and Software Inventory,” on page 479

Part VIII, “Remote Management,” on page 493

Part IX, “Event Monitoring,” on page 507

Part X, “Reports,” on page 531

Part XI, “Appendixes,” on page 545

Audience

This guide is intended for ZENworks administrators.

Feedback

We want to hear your comments and suggestions about this manual and the other documentation
included with this product. Please use the User Comments feature at the bottom of each page of the
online documentation, or go to

Novell Documentation Feedback site (http://www.novell.com/

documentation/feedback.html)

and enter your comments there.

Documentation Updates

For the most recent, updated version of the

ZENworks 7.3 Linux Management Administration Guide

,

visit the

Novell

®

ZENworks 7.3 Linux Management Edition documentation Web site (http://

www.novell.com/documentation/zlm73)

.

Additional Documentation

ZENworks 7.3 Linux Management is supported by other documentation (in both PDF and HTML
formats) that you can use to learn about and implement the product:

Novell ZENworks 7.3 Linux Management Installation Guide

Novell ZENworks 7.3 Linux Management Troubleshooting Guide

In addition, the other capabilities included in the ZENworks 7 suite have extensive documentation
for your use. For a full list of this documentation, see the

Novell ZENworks 7 Linux Management

documentation Web site (http://www.novell.com/documentation/zlm7_dell)

.

«
...
17
18
19
20
21
...
»

Summary of Contents for ZENWORKS LINUX MANAGEMENT 7.3 IR2













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments