Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2, Administration Manual

Page: 441 / 684

Using Preboot Services 441
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
3 In the Create New Bundle Wizard, select Preboot bundle , then click Next to display the Select
Preboot Bundle Type page:
4
On the Select Preboot Bundle Type page, select AutoYaST bundle , then click Next to display the
Set General Information page:
5 Fill in the fields:
Name: (Required) Although bundles can be identified in ZENworks Control Center by their
type of icon, as well as the folder they are listed under, you should develop a naming scheme
that differentiates the AutoYaST bundles that are listed together in a folder.
For more information, see
Appendix C, “Naming Conventions in the ZENworks Control
Center,” on page 605 .
Folder: Browse for the location where you want the AutoYaST bundle to be displayed in
ZENworks Control Center. The folder must exist. You cannot specify a non-existent folder,
because ZENworks does not create them from this wizard.
Description: Provide a description to help you later recognize the exact purpose of this
AutoYaST bundle.