Nikon NPL-302 Series, Instruction Manual

Page: 193 / 234

Checking and Adjustment 6
Pulse Laser Station NPL-302 Series Instruction Manual 173
X1 Face-1 X axis tilt value
Y1 Face-1 Y axis tilt value
When you have taken the measurement, the
message on the bottom line changes from
DO
NOT TOUCH %
to
Turn to F2
.
2.
Take an F2 measurement to the same target.
Press
[ENT] .
VA2 Face-2 vertical angle (tilt-off value)
HA2 Face-2 horizontal angle (tilt-off value)
X2 Face-2 X axis tilt value
Y2 Face-2 Y axis tilt value
When the observation on F2 is completed, four parameters are displayed.
3.
Do one of the following:
– To return to the first observation screen, press [ESC] or the
Redo
softkey.
– To set parameters on the instrument, press
[ENT]
or the
OK
softkey.
The NPL-332 has vertical axis adjustment only.
The header displays Tilt instead of X and Y.
Otherwise, the calibration procedure is the same.