NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 73 / 330

4.3 Basic Settings and Operations
WF1967/WF1968
4-23
Select [Reset] and press
ENTER.
4.3.8 To Restore Initial Settings
Restore the initial settings from the Utility.
Restoring the settings to the initial state will turn off the output for continuous oscillation, sine wave,
1kHz, and 0.1Vp-p/open.
For a list of the initial settings refer to

P.16-2.
1.
When you press the MENU key, the top menu is
displayed. Select [UTILITY] and press ENTER key.
Utility screen opens.
2.
Select [Reset] and then press the ENTER key.
This initializes the settings.
4.3.9 Output On/Off
a) Key Operation
Switches the waveform output on/off when pressed (WF1967 has
an OUTPUT key, WF1968 has CH1 and CH2 keys). The "ON"
lamp above the key will lit when the output is turned on.
The output terminal is released when the output is turned off. Output impedance is 50Ω when
turned on. The synchronization/sub output is always on regardless of the waveform output on/off
settings. The on/off setting for the waveform output uses a mechanical switch. This causes
chattering to occur when the waveform output is switched on or off. Please use the trigger
burst or gate oscillation function when connecting to equipment which might malfunction due to
chattering.

P.4-93
Output on/off key
ON