NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 32 / 330

3.1 Panel Component Names and Functions
WF1967/WF1968
3-2
3.1 Panel Component Names and Functions
This section describes the names and functions of the components on the front panel and rear panel.
3.1.1 Front Panel of WF1967
Figure 3-1 Front Panel of WF1967
Basic parameters
Allows waveform, frequency,
amplitude and DC offset to be
changed.

P.4-16
MODE key
Changes the oscillation mode

P.4-27, P.4-58,
P.4-71, P.4-88
MENU key
Displays the top menu

P.4-11
Modify knob
Selects items, or increases/decreases values

P.4-9
Arrow keys
Selects items, or increases/decreases values

P.4-9
Manual trigger key
Used to trigger sweep or burst

P.4-77, P.4-95
Triggered lamp
Lights when a trigger is accepted

P.4-77, P.4-95
UNDO key
Undo setting changes
Lamp above lights up when UNDO is
available

P.4-17
Power switch

P.4-2
LCD screen
Soft-keys
The operation items are
displayed on the LCD
screen

P.4-7
Next Soft key
Switches the pages of the
setting screens

P.4-7
CANCEL key
Performs a cancel operation

P.4-17
Waveform output on/off key
Turns the waveform output on/off.
When turned on, the “ON” lamp above is lit

P.4-23
Primary waveform output terminal

P.3-7
Sync/sub-output terminal

P.3-8
External modulation/addition input
terminal

P.3-10
External trigger input terminal

P.3-11
ENTER key
Fixes the setting

P.4-17
Numeric keypad
Used for numerical input and waveform setting

P.4-14, P.4-15
USB flash memory
port

P.5-7