NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 144 / 330

4.9 Setting and Operation of Burst
WF1967/WF1968 4-94
c) Screen for trigger burst setting(second page)

Burst mode [BrstMode]
Set the burst mode. This sets the trigger burst [Trigger].

Mark wave number [Mark]
The wave number oscillating every time a trigger is accepted. 0.5 This can be set in cycle unit.

Trigger delay [TrigDly]
Trigger delay time. Start oscillation when the specified time elapses after accepting a trigger.

P.4-95

Trigger [Trig]
The trigger condition. Select as a trigger source from the inside or outside.

P.4-95

Stop level [StpLvl]
The signal level while oscillation is stopped. Set the level by specifying Off or On.

P.4-97
d) Waveform that trigger is unavailable
Noise and DC cannot perform trigger burst.
e) Setting items necessary for trigger burst
Set the oscillation start/stop phase [Phase] on the first page of the setting screen.
Set mark wave number [Mark] on the second page of the setting screen.
The stop level [StpLvl] on the second page of the setting screen is usually set as Off [Off].

P.4-97
A trigger is necessary for trigger burst. See the next section.
Trigger
Stop level
Trigger delay
Set the burst mode to
[Trigger]
Pressing the NEXT key
switches the display to
the first page
Mark wave number
Indicates that the second
page
is displayed