NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 195 / 330

7.2 Display Procedure and Overview of Screen for Creating/Editing Arbitrary Waveforms
WF1967/WF1968 7-3
7.2 Display Procedure and Overview of Screen for
Creating/Editing Arbitrary Waveforms
An arbitrary waveform is created or edited in the ARB Edit screen.
1.
Pressing the MENU key opens the top
menu. Then, select [ARB Edit] and press
the ENTER key. This opens the ARB Edit
screen.
2.
The ARB Edit screen has two types of display formats.
They are a list display, which displays values side by side, and a graph display. You can switch
between displays using the tabs on the far left of the screen.
[Index] shows the number of control points, beginning with zero (0). Start point is fixed to X =
0.000000. End point is fixed to X = 1.000000, and the paired Y values of both the start and end
points are the same. (the same point).
If an output waveform is set to the arbitrary waveform in the edit memory, the waveform being
created appears as is in the output. If the output waveform is set to other waveform, when you
select the [Apply] button and press the ENTER key, the setting of output waveform is changed
to the arbitrary waveform in the edit memory, and the waveform being created appears in the
output.

List display
For the list display, a waveform in process of creation and a list of control points are displayed.
A shape of waveform is created by setting X and Y values for each control point.
Waveform output
buttons
Waveform in
process of
creation
List of control points
[Index], [X], and [Y]
Select [ARB
Edit]