NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 197 / 330

7.3 Creating New Arbitrary Waveform
WF1967/WF1968 7-5
7.3 Creating New Arbitrary Waveform
There are the following three types of methods to newly create an arbitrary waveform:
• Create a new arbitrary waveform thoroughly
First, press the [New] soft-key to clear the edit memory. Then, enter control points. The next
section describes the example of creation.
• Based on the standard waveform, modify it to create a new arbitrary waveform
First, press the [Wfm Copy] soft-key to copy a standard waveform to the edit memory. Then,
modify control points. How to operate control points is the same as the case of creating a new
arbitrary waveform thoroughly.
However, noise and DC of the standard waveform cannot be copied. Square and pulse waves are
copied as ideal square waves that keep duty.
• Based on the saved arbitrary waveform, modify it to create a new arbitrary waveform
First, press the [Recall] soft-key to copy the saved arbitrary waveform in the control point format
onto the edit memory. Then, modify control points. How to operate control points is the same as
the case of creating a new arbitrary waveform thoroughly.