NF WAVE FACTORY WF1967, Instruction Manual (Operations, Page: 308 / 330

17.8 Burst Oscillation Mode
WF1967/WF1968 17-18
±0.5V or more 5 digits or 1mV
Remarks When the waveform is DC, gated single sweep is not
available
17.7.6 Duty Sweep
Waveform Square wave and pulse wave
Setting range of start and stop duty
Square wave
Duty variable range standard 0.0100% to 99.9900% (resolution 0.0001%)
Duty variable range extend 0.0000% to 100.0000%(resolution 0.0001%)
Pulse wave 0.0170% to 99.9830% (resolution 0.0001%)
Limited within the allowed setting range of duty
according to the oscillation frequency.
17.8 Burst Oscillation Mode
Use of modulation function In auto burst mode, modulations are possible
simultaneously.
In other burst modes, modulations except for FSK and
PSK are possible simultaneously.
Burst mode
Auto burst Repeats oscillating the number of mark wave and stopping
the number of space wave.
Trigger is disabled
Trigger burst Oscillates the number of mark wave in synchronization
with trigger
Gate Oscillates integer multiples in cycles or half-cycles, in
synchronization with the gate signal
However, when the waveform is noise, it makes
oscillation on/off by the gate signal.
Triggered gate Gate oscillation, that gate is toggled on and off for each
trigger.
Target waveform
Auto, trigger burst Standard waveforms except for noise and DC, and
arbitrary waveforms
Gate, triggered burst Standard waveforms except for DC, and arbitrary
waveforms
Mark wave number setting range 0.5 to 999,999.5 cycles, 0.5 cycle unit
Space wave number setting range 0.5 to 999,999.5 cycles, 0.5 cycle unit
Oscillation stop unit at gate Cycle, Half Cycle (switch)
Setting range of start/stop oscillation phase
-1800.000° to +1800.000° (resolution 0.001°)