NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 307 / 330

17.7 Sweep Oscillation Mode
WF1967/WF1968 17-17
17.7.2 Frequency Sweep
Waveform Standard waveforms except for noise, pulse wave and DC,
and arbitrary waveforms
Setting range of start and stop frequency
0.01µHz to 200MHz
Resolution: 0.01µHz (< 50MHz), 0.1µHz (50MHz
≦
)
Limited within the allowed setting range of frequency for
each waveform.
Sub-output is turned off when the peak frequency exceeds
160MHz.
With the peak frequency exceeding 110MHz, the value
combined waveform amplitude and DC offset is limited to
±2V/open.
17.7.3 Phase Sweep
Waveform Standard waveforms except for noise and DC, and
arbitrary waveforms
Setting range of start and stop phase -1800.000° to 1800.000° (resolution 0.001°)
17.7.4 Amplitude Sweep
Waveform Standard waveforms except for DC, and arbitrary
waveforms
Setting range of start and stop amplitude
Oscillation frequency 110MHz or less
0Vp-p to 20Vp-p/open
Oscillation frequency more than 110MHz
0Vp-p to 4Vp-p/open
Setting resolution of start and stop amplitude
999.9mVp-p or less 4 digits or 0.1mVp-p
1Vp-p or more 5 digits or 1mVp-p
17.7.5 DC Offset Sweep
Waveform Standard waveforms and arbitrary waveforms
Setting range of start and stop DC offset
Oscillation frequency 110MHz or less
-10V to +10V/open
Oscillation frequency more than 110MHz
-2V to +2V/open
Setting resolution of start and stop DC offset
±499.9mV or less 4 digits or 0.1mV