NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 317 / 330

17.17 Options
WF1967/WF1968 17-27
Remote control GPIB IEEE-488.1, SCPI-1999/IEEE-488.2
USB USBTMC, USB 1.1 Full-speed
LAN(Option)
17.17 Options
PA-001-1318 multi-I/O cable Cable with connector on one end, for connection to
multi-I/O connector on rear panel. 2 m length. Cut off at
one end.
PA-001-2342 LAN I/F 10BASE-T/100BASE-TX,RJ-45 connector
17.18 General Characteristics
Display 4.3 inch TFT color LCD
I/O ground Signal grounds for waveform output (FCTN OUT),
synchronize/sub-output (SYNC/SUB OUT), external
modulation/addition input (MOD/ADD IN) are insulated
from the enclosure.
These signal grounds are shared in the same channel.
The signal ground for the external 10MHz frequency
reference input (10MHz REF IN) is insulated from the
enclosure.
Each of the signal grounds of CH1, CH2 and 10MHz REF
IN are independent.
The maximum withstand voltage is 42Vpk(DC+ACpeak)
between insulated signal grounds and enclosures.
Other signal grounds are connected to enclosures.
Power supply
Power voltage range: 100 VAC to 230VAC ±10% (250V or lower)
Power frequency range 50Hz/60Hz ±2Hz
Power consumption WF1967: 65VA or lower
WF1968: 85VA or lower
Overvoltage category II