NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 34 / 330

3.1 Panel Component Names and Functions
WF1967/WF1968
3-4
3.1.3 Front Panel of WF1968
Figure 3-3 Front Panel of WF1968
Basic parameters
Allows waveform, frequency,
amplitude and DC offset to be
changed.

P.4-16
MODE key
Changes the oscillation mode

P.4-27, P.4-58,
P.4-71, P.4-88
MENU key
Displays the top menu

P.4-11
Modify knob
Selects items, or increases/decreases values

P.4-9
Arrow keys
Selects items, or increases/decreases values

P.4-9
Manual trigger key
Used to trigger sweep or burst

P.4-77, P.4-95
Triggered lamp
Lights when a trigger is accepted

P.4-77, P.4-95
UNDO key
Undo setting changes
Lamp above lights up when UNDO is
available

P.4-17
Power switch

P.4-2
LCD screen
Soft-keys
The operation items are
displayed on the LCD
screen

P.4-7
Next Soft key
Switches the pages of the
setting screens

P.4-7
CANCEL key
Performs a cancel operation

P.4-17
Waveform output on/off key
Turns the waveform output of CH1/CH2 to
on/off. When turned on, the
“ON” lamp above
is lit.

P.4-23
CH1 Primary waveform output terminal

P.3-7
CH1 Sync/sub-output terminal

P.3-8
CH2 Primary waveform output
terminal

P.3-7
CH2 Sync/sub-output terminal

P.3-8
ENTER key
Fixes the setting

P.4-17
Numeric keypad
Used for numerical input and waveform
setting

P.4-14, P.4-15
USB flash memory
port

P.5-7