NF WAVE FACTORY WF1967, Instruction Manual (Operations, Page: 85 / 330

4.4 Setting for Main Items
WF1967/WF1968
4-35
4.4.9 To Set DC Offset
a) Setting procedure
1.
Press the shortcut-key OFFSET to open
the DC offset input field. Or select the
[Offset] field and then press the ENTER
key to open the DC offset input field.
[Offset] is displayed at the top left on the
first page.
[Low] is displayed in the [Offset] field. If
the low level instead of DC offset is
displayed, press the OFFSET key again.
2.
Select the digit to be changed by using the right or left arrow key, and then use the up or
down arrow key or the modify knob to increment the value. The change is immediately
reflected to the output.
Or use the numeric keypad to enter the value. Press the ENTER key or the unit key
(soft-key) to set the input value and reflect it to the output.
b) Restriction on AC + DC
The maximum total value of AC amplitude and DC offset is restricted to ±10V/open (110MHz or
less) or ±2V /open.
For example, when the AC amplitude is 5Vp-p/open, DC offset is restricted to the range from
-7.5V/open to +7.5V/open. (When the frequency is 110MHz or less)
The maximum value also differs depending on the range setting of output voltage or Ext Add
setting.

P.4-40, P.4-43
DC offset
input field