NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 88 / 330

4.4 Setting for Main Items
WF1967/WF1968
4-38
4.4.11 To Set Waveform Polarity and Amplitude Range
a) Setting procedure
1.
Selecting the Polarity/Amplitude Range icon to
the right of the waveform name display will
show the current polarity and amplitude range
settings.
Press the ENTER key to open the selection list
for the polarity/amplitude range.
2.
Select the desired polarity and amplitude range
from the selection list and press the ENTER
key to reflect it in the output.
You can also enter the number of the desired
polarity and amplitude range displayed in the
list on the numeric keypad to reflect it in the
output.
b) What are polarity and amplitude range
You can reverse the polarity or change the amplitude range to single-polarity for each waveform.
The following figure shows the cases with sine waves:
"Reverse" only reverses a waveform without changing the sign of output DC offset.
Check
The polarity and amplitude range setting are separate settings for
each waveform.
Polarity
Amplitude
Normal
Inverted
Selection list (soft-key)