NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 121 / 330

4.8 Setting and Operation of Sweep
WF1967/WF1968
4-71
4.8 Setting and Operation of Sweep
4.8.1 Sweep type (Sweep type)
Sweep can be done for the following five types:
• Frequency sweep

P.4-82
• Phase sweep

P.4-83
• Amplitude sweep

P.4-84
• DC offset sweep

P.4-85
• Duty sweep

P.4-86
4.8.2 Screen for Setting and Operation of Sweep
This section describes the common screen structure in the sweep oscillation mode.
Settings and operations are performed in the Oscillator setting screen. When you press the MENU key
while another screen is displayed, the Top menu is displayed. Select [Oscillator] and then press the
ENTER key.
a) To set the oscillation mode to sweep
Selecting sweep oscillation mode force quits the Synclator function.
b) First page of the setting screen: Basic parameter setting screen
These are common items which are independent of the oscillation mode. Some settings are invalid
depending on the sweep type.
Press the MODE key to open the oscillation mode
selection list. Select the sweep oscillation mode
[Sweep]. (

P.4-27)
This switches to the sweep oscillation mode.
There are 3 pages of setting screens in total in the
modulated oscillation mode. You can switch the page
by using the NEXT key.
There are two stages of soft-keys
Indicates the first
page is displayed
Pressing the NEXT
key switches the
display to the
second page
Changes the oscillation mode to [Sweep]