NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 69 / 330

4.3 Basic Settings and Operations
WF1967/WF1968
4-19
b) Change Vp-p, Vrms, user-defined unit, etc.
Amplitude is used as an example here. For frequency and pulse width, you can use a similar
way.
1.
Select amplitude and then press the ENTER
key to open the input field.
2.
Press the [Unit] soft-key to move the cursor to
"Vp-p".
You can also press the right arrow key to move
the cursor to "Vp-p".
3.
You can use the up/down keys or the modify
knob to change the units to Vrms, dBV, or a
user-defined unit (in the case of sine wave
and load impedance Hi-Z).
This just changes
the display unit and numeric value, but the
output value itself does not change.
Also refer to the followings:
• Changing the frequency, cycle time

P.4-28, P.4-29.
• Changing the amplitude unit (Vp-p, Vpk, Vrms, dBm, dBV)

P.4-33.
• Changing the pulse width and duty

P.4-46.
• Setting user-defined units

P.12-2.
Vrms display
dBV display
or
Changing unit