NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 316 / 330

17.15 User-defined Unit
WF1967/WF1968 17-26
17.15 User-defined Unit
Function Set and display settings in any unit based on a specified
conversion expression
Setting items Frequency (Hz), cycle (sec), amplitude (Vp-p, Vpk), DC
offset (V), phase (deg) and duty (%)
Conversion expression [(internal sn]×m, [log
10
(internal sn]×m
Specify a conversion expression and values of n and m.
Internal setting indicates the value of Setting item above.
Unit string Maximum 4 characters
17.16 Other Functions
Memory for saving setting 10 sets (saved in the built-in non volatile memory)
Allowed saving to the USB flash memory
Parameter setting at power-on operation
Power-off with front panel operation
The operation state just before when the power was turned
off is restored (If the mode was sequence when the power
was turned off, the sequence mode and the sequence
execution state can be automatically restored)
Power off with shutting down a line
The contents of setting memory number 1 are applied (If
the automatic sequence was on when the power was
turned on, the sequence memory No. 1 is automatically
loaded to attempt compilation/execution.)
Output on/off at power-on operation Switches Last State, On, or Off
Power off
method
Power-On Output setting
Last State On Off
Panel
operation
The latest power
off state is restored
Output on Output off
Shutting down
a line
Output off Output on Output off
Sequence on/off at power-on operation Switches Last State, On, or Off
Power off
method
Power-On Sequence Auto Run setting
Last State On Off
Panel
operation
The latest
power off state
is restored
The latest power
off state is
restored in
Oscillator
Shutting down
a line
Oscillator
Sequences
memory#1
auto execution
Oscillator