NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 26 / 330

2.1 Checking Before Use
WF1967/WF1968
2-2
2.1 Checking Before Use
a) Safety check
For your own safety, please be sure to first read the following section of this manual.
• "Safety Precautions" (See page iii.)
• "2.3 Grounding and Power Supply Connection"
b) Checking the Exterior and Accessories
If the exterior of the cardboard container appears to be damaged (scrapes or dents, etc.), please
be sure to check the product for any signs of damage after take out from the container.
Please confirm the contents after take out them from the container.
If there are any signs of damage to the exterior of the product or if any of the accessories are
missing, please contact NF Corporation or dealer.
• Checking the Exterior
Please check that equipment has any damages on the panel, knobs and connectors.
• Checking the Configuration and Accessories
This product is configured as follows: Please confirm that no items are missing are
damaged.
This product has high-voltage portions inside. Absolutely never
remove its cover.
Do not touch the inside by yourself in any case.
c) Repackaging
When you re-pack the instrument for transportation, etc., use a box with appropriate strength
and size margin and some padding which can support the weight, to protect the instrument
sufficiently.
d) Rack Mounting Kit (optional)
Adapters for mounting the equipment in a 19-inch IEC, EIA standard rack, or JIS standard rack.
There are four types of adapter in total, an adapter for one unit and an adapter for two units (for
side-by-side mounting) for each product model.
They must be purchased separately.
Main unit .............................................................................................................. 1
Instruction Manual (Operations) .......................................................................... 1
CD (PDF Instruction Manual, Application software) ........................................... 1
PDF Instruction Manual:
Operations, Remote control,
Arbitrary waveform editing software, Sequence editing software,
Application software:
Arbitrary waveform editing software, Sequence editing software,
IVI (Interchangeable Virtual Instruments) Driver
Power code set (2m with 3-pin plugs) .................................................................. 1
WARNING