NF WAVE FACTORY WF1967, Instruction Manual (Operations, Page: 148 / 330

4.9 Setting and Operation of Burst
WF1967/WF1968 4-98
4.9.5 Gate Oscillation
While the gate is On, performs an oscillation with an integer cycle or half-cycle unit.
a) Gate oscillation example
Start oscillation/stop phase: 30 degrees, Oscillation stop unit: 1 cycle, Stop level: In case of Off. The
oscillation is stopped when reaching the start oscillation/stop phase after the gate signal is Off.
b) To set burst mode as gate oscillation
Setting gate oscillation force quits the Synclator function.
c) Screen for gate oscillation setting (second page)

Burst mode [BrstMode]
Set the burst mode. Set the mode here to gate oscillation [Gate].

Oscillation Stop Unit [OscStop]
The oscillation stop unit. Select from 1 cycle and half cycle.

P.4-100

Trigger [Trig]
The trigger condition (gate condition). Select as a trigger source from the inside or outside.

P.4-99

Stop level [StpLvl]
The signal level while oscillation is stopped. Set the level by specifying Off or On.

P.4-101
Select [Gate] on the burst mode setting menu
Stop level
Set the burst mode to
[Gate]
Pressing the NEXT
key switches the
display to the first
page
Indicates that the second
page is displayed
Trigger
Oscillation stop unit
Select burst oscillation mode [BrstMode] on
the second page of the setting screen, and
press the ENTER key to display the burst
mode selection list. Selecting gate oscillation
[Gate] sets the gate oscillation mode.
Gate signal
Oscillation start/stop phase
30 degrees
Output signal
Gate on Gate off
Gate on Gate off