NF WAVE FACTORY WF1967, Instruction Manual (Operations, Page: 122 / 330

4.8 Setting and Operation of Sweep
WF1967/WF1968
4-72
c) Second page of the setting screen: Screen for Setting the Sweep
The following figure is an example of selecting the frequency as a sweep type.

Sweep type [SwpType]
Subject to be swept. Select one from among frequency, phase, amplitude, DC offset, and duty.

P.4-74

Sweep Mode [SwpMode]
The oscillation style of sweep. Select from continuous sweep, single sweep, and gate single
sweep.

P.4-75

Sweep function [SwpFctn]
Sweep form. Select from one-way, shuttle. Linear and log are available only when the sweep type
is frequency.

P.4-75

Sweep start value[Start]
The starting value of sweep.

P.4-74

Sweep stop value [Stop]
The stop value of sweep.

P.4-74

Trigger [Trig]
The trigger condition of single sweep and gated single sweep. Select as a trigger source from the
inside or outside.

P.4-77

Stop level [StpLvl]
The signal level when gated single sweep is stopped. Set the level by specifying Off or On.

P.4-76

Sweep time [Time]
Transition time to sweep from the starting value to the stop value.

The oscillation stop unit [OscStop] in the gated single sweep
The oscillation stop unit in the gated single sweep. Select from 1 cycle unit and half cycle unit.

P.4-76

External control [ExtCtrl] via the Multi I/O connector
External control by the Multi I/O connector is enabled, disabled.

P.4-81

Sweep marker value [Marker]
The marker value of sweep.

P.4-79
Sweep start value
Sweep stop value
Sweep time
Trigger of a single, gated
single sweep
Sweep Mode
Sweep function
Soft-key has
2 rows
Sweep marker value
Indicates that the second page
is displayed
Sweep type
Pressing the NEXT key
switches the display to
the third page
Gated sweep
oscillation stop unit
Stop level of the gated
single sweep