NF WAVE FACTORY WF1967, Instruction Manual (Operations, Page: 175 / 330

6.2 Meaning of Each Parameter and Waveform Examples
WF1967/WF1968 6-11
b) Off-Ph Ctrl Sine

Overview
Sine wave which follows a slope during shut off.
Application examples
•Simulates the output waveform of an AC power supply with a restricted rising and falling time

Meaning of each parameter
The example shows the case where the amplitude range is ±FS.
•Shut off start phase (OffPhase)
The original sine wave ends at this phase.
Variable range: 0.00
°
to 360.00
°
•Shut off slope time (SlopeT)
The linear change in time of the amplitude from the
amplitude of the shut down start phase to the zero.
Variable range: 0.00 % to 50.00 % of basic cycle
The amplitude of the original Sine wave is fixed at ±FS.
Please note that the amplitude may be less than ± FS
depending on the value of the shut down start phase.

Waveform examples
The polarity and amplitude range are all Normal, ±FS.