NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 59 / 330

4.2 Screen Configuration and Operation
WF1967/WF1968
4-9
b) To switch the display format
1.
In the left example, the Single tab screen
is displayed.
On this screen, the settings are displayed
in text format.
2.
Use the arrow keys or the modify knob to
select the Graph tab.
3.
Press the ENTER key to switch to the
Graph tab screen.
On this screen, you can set the
parameters while checking the image of
the output waveform.
Check
In WF1968, the display can be switched between 2-channel simultaneous
display and 1-channel display by using the tab.
Tab
selection
or
The Single tab screen
is displayed
The Graph tab is
selected
The Graph tab screen
is displayed