NF WAVE FACTORY WF1967, Instruction Manual (Operations, Page: 65 / 330

4.3 Basic Settings and Operations
WF1967/WF1968
4-15
4.3.2 To Change Waveforms
1.
When the FCTN key is pressed, waveforms which
can be selected will lit on the numeric keypad.
Current waveform is flashing.
At the same time, a selection list of waveforms will
open.
2.
Pressing the key directly below the lighting
waveform will select that waveform and reflect it in
the output. For example, in the image shown to the
left, pressing the [2] key will select the Square wave.
Another method is to choose the selection list with
the arrow keys or modify knob and then press
ENTER to apply the settings.
The waveform is
set to square
wave