NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 143 / 330

4.9 Setting and Operation of Burst
WF1967/WF1968 4-93
4.9.4 Trigger burst
Every time a trigger is accepted, perform oscillation with the specified cycle(s).
a) Trigger burst example
Mark wave number (oscillation wave number): 4 waves, start oscillation/stop phase: 30 degrees,
stop level: In case of Off.
b) To set burst mode to trigger burst
Setting trigger burst will force quit the Synclator function.
Select [Trigger] on the burst mode setting menu
Select burst oscillation mode [BrstMode] on
the second page of the setting screen, and
press the ENTER key to display the burst
mode selection list. Selecting trigger burst
[Trigger] sets the trigger burst mode.
Oscillation start/stop phase
30 degrees
Trigger
delay time
Trigger signal
Output signal
No new trigger is accepted
during this interval
Trigger
delay time