New lift FST-2, Manual, Page: 125 / 194

5 Menu tree
5.4 MAIN MENU – Config
FST-2_HB.EN12/05
123
outputs “Display 1” and “Display 2” can have the following functions:
Display 1
- Issue “Chime–Roof” signal, if
Gong-Roof=YES
is set (see “Chime–
Roof” on page 117).
- Load display for the “Loading function” (see “Speech output codes” on
page 123).
- Lift-Boy mode buzzer (see “Lift-Boy mode” on page 134).
Display 2
- Issue “Chime–Floor” signal if
GongFloor=YES
is set (see “Chime–
Floor” on page 117).
Pin-34 Functn The input “Loading button” (FPM X4.34) can have the following functions:
Speech output codes The
Speech code [1]
provides the starting value for the position
indicators. Position values are added to the starting value, coded as set in
Fig. 5.12 Function of individual bits
Setting Function
0
Loading button (see “Speech output codes” on page 123)
1
Landing calls ON/OFF
2
Lift-Boy mode ON/OFF (see “Lift-Boy mode” on page 135)
3
V.I.P. mode 2 with “multiple call” ON/OFF
4
V.I.P. mode 2 with “single call” ON/OFF
5
Start button for fireman mode (Australia)
6
Bank control OFF/ON