New lift FST-2, Manual, Page: 181 / 194

7 Error List
7.4 Error messages
FST_HB.EN12/05
179
33 RELEVELLING ABORT
An error has occurred during
relevelling and the relevelling
process was cancelled.
-
Check drive and pre-selection.
-
Check safety circuit bypass.
-
Check bypass relay FST K20.
-
See “Bypass t–OFF” on
page 139.
34 BYPASS FAILURE
Safety circuit bypass not available
despite zone message.
-
Check bypass relay FST K20.
-
Check wiring of the safety
circuit.
-
Check the safety circuit.
-
See “Bypass t–OFF” on
page 139.
35 DOOR LOCK TIMEOUT
The set door lock timeout is not long
enough. The car door is closed but the
lock contact has not closed in the
time set.
-
Check shaft doors
mechanically (smooth
running).
-
Check door lock contacts.
-
Increase door lock timeout
(see “Lock delay” on
page 139).
36 CAR LIGHT FAILURE
FSM sensor detected faulty car light.
-
Check car light.
-
Check sensor on FSM (jumper
J112).
37 REGULATOR ERROR-
Error message from the frequency
converter when using a converter
with serial control. Check error list of the frequency
converter. The number of the
regulator error corresponds to
the error code in the
documentation of the frequency
converter.
38 REFILL PUMP TIMEOUT
Error during refilling of the hydraulic
counterweight. The cut-off pressure for refilling
was not reached within 30
seconds. Check function and
control of the refill valve.
39 SAFETY CURTAIN BRK.
The safety curtain has been
interrupted while the car was
moving. Check function and control of the
safety curtain (see “SS-Curtain”
on page 140).
40 SAFETY CURTAIN FAIL
Error during test of safety curtain. The FST-2-Controller issues a
test signal for the safety curtain
via FSM X7 or X9 before each
drive. The safety curtain
acknowledges the test signal
with an interruption of the safety
circuit.
-
Check operation of the safety
curtain.
-
Check duration of the test
impulse in
MAIN MENU -
Doors - Doors Basic
- SS-CurtainWait
(see
“SS-CurtainWait” on
page 140).
Code Message Description Reason