New lift FST-2 Manual Download Page 34 | Manualshive

Page: 34 / 194

New lift FST-2 Manual Download Page 34

3 FST-2-Controller user interface
3.2 Keypad functions

32

FST-2_HB.EN12/05

3.2 Keypad functions

The FST-2-Controller is operated using seven keys. The keys have
different functions in the different displays.

Frequency converter with DCP interface

When switching on

D

Operation and parametrising of frequency converters with
DCP interface can be done from the FST-2 menu (FST X11
connected). The display of the frequency converter can be
simulated on the FST-2 display by pressing the

D

key once.

The FST-2 keys provide access to the functions of the
frequency converter. The FST-2 display returns to standard
mode by pressing the

D

key again.

S

Pressing and holding key

S

during the switch-on sequence of

the FST-2 starts emergency operation. In emergency
operation no drives are possible. Emergency operation is
required if the FST-2 cannot be switched on in normal mode
due to a malfunction. The complete FST menu and the PC-
Card functions are active in emergency mode!

«
...
32
33
34
35
36
...
»

Summary of Contents for FST-2



































































































































































































Reviews:

No comments