New lift FST-2, Manual, Page: 85 / 194

4 Technical data
4.7 ADM landing call module
FST-2_HB.EN12/05
83
The landing call module is available with three different software versions:
- ADM-S (“Single”) for single lifts
- ADM-D (“Double”) for grouped lifts
- ADM-E (“EAZ”) for position indicators
Terminals 1 .. 20 of terminal strip X3 are assigned differently depending on
the software version.
The values in the table are default factory settings. Functions of individual
systems can differ from those in the table. Please refer to the system
specific wiring diagrams.
Terminals for which more than one function is listed can be set to one of
these functions in the factory. The function “Direction” can be configured as
output for the direction of travel or as departure direction output in the FST-
2 menu.
The terminals labelled key switch 1 and 2 can be set to fire signal, smoke
detector, lift off and priority landing.
ADM-X3 Function ADM-S Function ADM-D Function ADM-E
1 +24V +24V +24V
2 Landing call UP Landing call UP
3 Landing call DOWN Landing call DOWN
4 Enable landing calls Enable landing calls Chime trigger
5 +24V +24V +24V
6 Occupied or out of operation
indicator Occupied or out of operation
indicator (left lift) Occupied or out of operation
indicator
7
-
Display “Special drive”
-
Chime trigger
-
Display “Special drive”
-
Chime trigger (left lift)
-
Special display 0 (“custom 0”
Floor display 5
8 Direction UP Direction UP (left lift) Direction UP
9 Direction DOWN Direction DOWN (left lift) Direction DOWN
10 GND GND GND
11 GND GND GND
12 Key switch 1 Key switch 1
13 Key switch 2 Key switch 2
14
-
Special display 0 (“custom 0”
-
Floor display 4
Floor display 4
15 +24V +24V +24V
16 Floor display 0 Direction DOWN (right lift) Floor display 0
17 Floor display 1 Direction UP (right lift) Floor display 1
18 Floor display 3 Occupied or out of operation
indicator (right lift) Floor display 3
19 Floor display 2 Chime trigger (right lift) Floor display 2
20 GND GND GND