New lift FST-2, Manual, Page: 126 / 194

5 Menu tree
5.4 MAIN MENU – Config
124
FST-2_HB.EN12/05
Output type
and issued to the voice computer by the SPK module.
The speech codes
Speech code [2 .. 20]
correspond to the
controller states in the following table. The numerical value set for each
speech code is coded as set in
Output type
and issued to the voice
computer by the SPK module if the respective controller state occurs.
Loading function The loading function is activated with input “Loading button” (FPM X4.34),
it is used for loading the car. The car door is kept open until
- the door close button is pressed,
- or the maximum loading time
Load Time – Max.
has elapsed.
The loading function provides the following options:
Loading program
Two different loading programs can be selected in
Program no.
.
Speech code Controller state
Speech code [1]
Initial value for position indicators
Speech code [2]
Car starts moving
Speech code [3]
Door is opening
Speech code [4]
Door is closing
Speech code [5]
Door nudging
Speech code [6]
Priority car enabled
Speech code [7]
Priority car disabled
Speech code [8]
Priority landing enabled
Speech code [9]
Priority landing disabled
Speech code [10]
Priority (landing or car) enabled
Speech code [11]
Priority (landing or car) disabled
Speech code [12]
Fireman mode
Speech code [13]
Fire signal
Speech code [14]
Evacuation
Speech code [15]
Forced stop
Speech code [16]
Out-of-use
Speech code [17]
Overload
Speech code [18]
Full load
Speech code [19]
Direction of travel UP
Speech code [20]
Direction of travel DOWN
Setting Function
0
– Loading button can be operated with the car door closed,
the car door opens after pressing the button.
– Pressing the loading button again terminates the loading
function.