New lift FST-2, Manual

Page: 21 / 194

3 FST-2-Controller user interface
3.1 LC-Display and messages
FST-2_HB.EN12/05
19
Number 2 = 6 = 4 + 2
F2:
Number 1 = 1
Number 2 = 2
These values result in the following active bits:
F1:
Number 1 = 8 + 4
=>according to the table for F1 (Number 1) bits 2 and 3 are active
=>the door is reversing and limit switch “open” has switched
Number 2 = 4 + 2
=>according to the table for F1 (Number 2) bits 5 and 6 are active
=>the photocell is interrupted and the reversing contact has
switched
F2:
Number 1 = 1
=>according to the table for F2 (Number 1) bit 0 is active
=>the door is reversing and limit switch “open” has switched
Number 2 = 2
=>according to the table for F2 (Number 2) bit 5 is active
=>the car light sensor is active and the door motor is closing
Internal motor states
Motor=00
Internal motor states are coded according to the following table:
Internal states of the pre-
selection relays
Vst=0000
Fig. 3.3 Hexadecimal encoding of a 16-bit register
Value
Motor =
motor state
00
Motor ready
01
Motor starting
02
Motor running
03
Motor approaching stop position
04
Motor braking
05
Motor stopping
3
4
8-11
12-15
digit
digit
digit
digit