New lift FST-2, Manual, Page: 123 / 194

5 Menu tree
5.4 MAIN MENU – Config
FST-2_HB.EN12/05
121
Park drive programs The FST-2-Controller has a scheduler (calendar) that enables time- and
day-dependent park drive programs. Each day of the week (SU – SA) can
de divided in three time zones. Different park drive programs (park floor
and waiting period) can be set for each of these time zones.
Show LON modules After completing the “Search LON modules” function, the FST-2 provides
a list with all LON modules connected to the LON bus.
The list is structured as follows:
Departure arrows Mode of departure arrow outputs ADM X3.8 and X3.9 on the
landing call module:
YES: Direction display with departure arrow
NO: Direction display with direction arrow
Only when door open: Direction display as departure arrow
only when car door is open YES
NO
only when door open
Depart.Arrows Max Maximum on-time of departure arrows when the car is not
moving. 0 .. 9999 sec
DoorC=Emerg-EndSw. Door C input FST X14.6 on the pre-selection module is
interpreted and stored as a top emergency end switch with
hydraulic lifts, according to EN 81. YES
NO
Menu item Description Setting range
Code Description Setting range
Day
Day of the week SU .. SA
from
Start time of the time zone 0:00 .. 23:45
to
End time of the time zone 0:00 .. 23:45
Prog
Program 1 .. 3 (for time zone 1 .. 3) 0 .. 2
Floor
Floor: Parking floor 0 .. top floor
W-Time
Waiting period before starting the park drive. 0 .. 60 min
A The first LON module of five connected modules is displayed.
B Module type “FSM” with software version “00117”, appendix “010/
002”.
C LON-ID of the module: „010030496900“
D First four configuration bytes of the module.
£
/
¢
Switch to configuration bytes 5 .. 12
S
+
£
Show next LON module
S
+
¢
Back to previous LON module
¤
Toggle line C of ADM modules
LON module [001\005]
Prg:FSM00117 010\002
ID:01 00 30 49 69 00
[00] [00] [00] [00]
ID:01 00 30 49 69 00
[00] [00] [00] [00]
[00] [00] [00] [00]
[00] [00] [00] [00]