New lift FST-2, Manual, Page: 55 / 194

4 Technical data
4.3 FSM car control module
FST-2_HB.EN12/05
53
4.3 FSM car control module
The FSM car control module provides the interface between FST-2-
Controller and all car signals. Signal exchange between FSM and FST-2
takes place via the LON bus. The FSM is installed either in the service box
on the car roof or in the car panel.
After switching off the main switch, parts of the car control module
are still live.
- Plug X19 (car light) is only off circuit after the car light supply has
been switched off!
- Plug X13 (emergency light) is only off circuit after the trailing cable
plug X30 has been unplugged!
Technical data
Description Value Unit
Supply voltage 24 ±10% V DC
Power consumption 300 mA
Outputs Excess load and short-circuit proof
Inputs/outputs Low-active
Length × width × height 250 × 140 × 34 (9 7/
8 × 5 1/2 × 1 3/8)
mm (inch)
Temperature range
Storage / transport -20 - +70 (-4 - +158) °C (°F)
Operation ±0 - +60 (32 - 140) °C (°F)
Relative humidity
Storage / transport 5 - 95 %
Operation 15 - 85 %