New lift FST-2, Manual, Page: 17 / 194

3 FST-2-Controller user interface
3.1 LC-Display and messages
FST-2_HB.EN12/05
15
Display Description
LIK-Errs:00000 00000
Diagnosis of absolute value encoder
function (see page 16), this display is
irrelevant when using incremental
positioning.
ENC:10000000[989680]
Real-time display of increments counted by
the encoder on plug X2. The counted
increments together with the covered
distance can help when calculating the
required
Resolution
.
Gray=43210 KO KU ZB
Current state of the solenoid switches with
incremental positioning, see page 16
Door-A: F1=00 F2=00
Current state of the FSM for door A, see
page 16
Door-B: F1=00 F2=00
Current state of the FSM for door B, see
page 16
Door-C: F1=00 F2=00
Current state of the FSM for door C, see
page 16
Motor=00 VST=0000
Internal motor state (see page 19) and
states of the pre-selection contact outputs
(see page 20)
Pos:Virt=0b Real=00
Generated and actual position messages
from the car, see page 20
SHK=SABCN
State of the safety circuit, see page 22
Mgr1:Drv=00 Call=00
Internal NEW LIFT diagnostic message
Mgr2:A=02 B=00 C=00
Internal NEW LIFT diagnostic message
NextPoss=ff VT=V2
Next possible stop (
NextPoss
) that can
be approached and the set speed (
VT
), see
page 22
Port EXIN1=EGALPUDR
State of input EXIN1, see page 22
Port EXIO2=76543210
State of input EXIN2, see page 23
Port H8IN1=ZBSMVO
State of input H8IN1, see page 23
FSM-X6: L=1 V=0 K=0
State of outputs on FSM X8 and X19, see
page 23
SRC:00 00 00 00 00
Source of the special drive signals fireman,
fireman mode, landing control OFF, lift off
and service mode, see page 24
LWE: 255% E0 F0 O0
State of the weight sensor, see page 25
Proj.Status=........
State of the project specific parts of the
program (internal)
PC:s0 m1 c0 f0 Mb005
State of the PC-Card slot, see page 26
Pkt\s In=005 Out=002
Incoming and outgoing data packets of the
FST-Controller in [packets/sec]
ASV: 0000000 P=[00]
State of the pawl device, see page 26
FSM msgs=00123
Number of message packets from the FSM
car control module to the FST-2-Controller