New lift FST-2, Manual, Page: 25 / 194

3 FST-2-Controller user interface
3.1 LC-Display and messages
FST-2_HB.EN12/05
23
Input EXIO2
Port EXIO2=76543210
Input/output EXIO2 displays the states of the programmable inputs and
outputs according to the following table:
Input H8IN1
Port H8IN1=ZBSMUO
Input H8IN1 displays the inputs of the drive processor according to the
following table:
FSM-X6
FSM-X6: L=1 V=0 K=0
The FSM-X6 display shows the states of the following outputs of the car
control module:
Bit Terminal Setting Description
0
FST X1.4 active Programmable input/output 0
1
FST X1.5 active Programmable input/output 1
2
FST X1.6 active Programmable input/output 2
3
FST X1.7 active Programmable input/output 3
4
FST X1.8 active Programmable input/output 4
5
FST X1.9 active Programmable input/output 5
6
FST X1.10 active Programmable input/output 6
7
FST X1.11 active Programmable input/output 7
Bit Terminal Setting Description
0 Not assigned
1 Not assigned
O
FSM X13.1 active Correction switch top “KO”
U
FSM X13.3 active Correction switch bottom “KU”
M
FST X1.22 active Motor monitoring
S
FST X1.23 active Standstill monitoring
B
FST X1.19/20 active Brake monitoring
Z
FST X13.9 active Zone message
Code Terminal Setting
L=
car light
0
FSM X19.1 active Car light OFF
1
FSM X19.1 not active Car light ON
Code Terminal Setting
V=
car ventilator
0
FSM X19.4 not active Car ventilator OFF
1
FSM X19.4 active Car ventilator ON