New lift FST-2, Manual, Page: 36 / 194

3 FST-2-Controller user interface
3.3 LEDs
34
FST-2_HB.EN12/05
Error list
Information page
3.3 LEDs
Three LEDs on the front panel of the FST-2-Controller display the device
status.
ERROR [00037\00040]
28.09 10:18:26 [012]
Door close failed
FLOOR: 03 V00 R01 I00
¢
Switch to 2nd to 8th information byte in line D
£
Switch to initial display in line D
S
+
£
To previous error message
S
+
¢
To next error message
£
Scroll one line up
¢
Scroll one line down
E
Back to main screen
- FST-2 Information -
HW Ver.:12-16
SW VER.:V1.100-0026
:18\05\1999
LED Colou
r
State Reason Action
RUN green on The power supply is on
The hardware of the FST-2-
Controller is working correctly
off No power Check the 24V power supply of the FST-
2-Controller
The hardware of the FST-2-
Controller is faulty Inform your NEW LIFT Hotline!
STATUS green on The drive processor is working
correctly
flashing Landing control OFF
¥
switches landing control back on
off Fault in drive processor Inform your NEW LIFT Hotline!
ERROR red on Drive not possible Line B shows the reason of the error. A
drive is only possible after the error has
been corrected.
flashing One or more errors were added to
the error list The ERROR LED is off after the error list
has been called up.
off There is no error or event