New lift FST-2, Manual, Page: 161 / 194

6 Programmable inputs and outputs
FST-2_HB.EN12/05
159
Examples
Setting delay /
debounce value
Output of the controller states set for a flag can be delayed or debounced.
Select menu item
MAIN MENU - Configuration - I\O
Configuration - I\O Flags - Delay
and select the
Flag [0 ..
7]
to be parametrised (
S
+
£
).
Set seconds or switching operations according to the debounce type set
with bit 1 in
MAIN MENU - Configuration - I\O Configuration
- I\O Flags - Ctrl
.
Setting flag control The respective flag can be blocked or enabled with the flag control register.
This parameter also determines whether flag output is delayed or
debounced.
Select menu item
MENU - Configuration - I\O Configuration
- I\O Flags - Ctrl
and select the
Flag [0 .. 7]
to be
parametrised (
S
+
£
).
Flag control is a two digit hexadecimal value coding an 8-bit register.
User error 1 The user defined error no. 2 has
occurred (See “User error” on
page 161.). 10000000
User error 2 The user defined error no. 3 has
occurred (See “User error” on
page 161.). 20000000
Send fax report A fax report is sent. 40000000
NEW LIFT internal 80000000
Flag function Description Value
(hexadecimal)
Flag functions
MASK
“Emergency stop” OR “Runtime monitoring”
00000024
“Inspection” OR “Auxiliary control”
00000018
“Fire signal” OR “Fireman mode” OR “Lift OFF” OR “
Priority car” OR “Priority landing”
00001CC0
“Maintenance required”
00100000
“Homing” OR “Park drive”
00C00000