New lift FST-2, Manual, Page: 136 / 194

5 Menu tree
5.6 MAIN MENUE – Calls
134
FST-2_HB.EN12/05
5.6 MAIN MENUE – Calls
Menu item Description Setting range
Landing calls –
Config Landing call program for each floor:
-
No Button: No landing button available.
-
DOWN–collect: One button for downward calls available.
-
UP–collect: One button for upward calls available.
-
Two button: Buttons for upward and downward calls
available.
-
STOP–collect: Upward and downward calls use the same
button.
No Button ..
STOP–collect
Landing calls –
Program
Door program for each floor:
-
Single: Only one shaft door available.
-
Selective: Shaft doors are handled selectively.
-
Order: Mutually locked shaft doors are handled in the
specified order.
-
Sequence: Mutually locked shaft doors are handled
following the order the calls were placed.
-
Through: All shaft doors are handled simultaneously.
Single ..
Through
Landing calls –
Door
Door program for each car door:
-
X: Door deactivated.
-
>A<: Door A activated, default position closed.
-
<A>: Door A activated, default position open.
The same settings apply to car doors B and C.
If an
X
is entered, landing and car calls for this door side on
this floor are blocked.
>A< .. X
Special call mode Call programs for landing and car calls (see “Special call
mode” on page 135). Standard
Non-collective
Single call mode
Lift-Boy mode Activate Lift-Boy mode (see “Lift-Boy mode” on page 135). YES
NO