NEC Express5800/140Rc-4, User Manual

Page: 220 / 400

6-24 Installing and Using Utilities
Through the management PC with direct connection
1.
Click [Program] - [NEC MWA] - [MWA] from the start menu on the management PC
installed NEC MWA.
MWA will start and open [Remote Control Manager].
2.
Select [Environment] - [Direct Connection Setting] from the [File] menu of [MWA
Remote Control Manager] to display the [Direct Connection] dialog box. Then provide
the following setting:
<Direct Connection>
Port No.: COM port on the management PC to be connected
Baud Rate: 19200
Flow Control: RTS/CTS
3.
Select [Configuration] from the [File] menu of [MWA Remote Control Manager] to
display the [Configuration] dialog box.
4.
Select [New] to display the [Select a model] dialog box.
5.
Check [Write data to FD]. Then select the model name to display the [Configuration for
BMC] dialog box for the server.
6.
Set and register the configuration information including the computer name on the
[Configuration for BMC] dialog box and then write the information into the floppy disk
with the following file name:
<Configuration Information File name>
CSL_LESS.cfg
7.
Select the [Properties] command from the popup menu displayed by clicking the right
mouse button on the server name to display the [Properties] dialog box.
8.
If the [Properties] dialog box appears, provide the following setting:
<[ID] page>
Connection Type: COM
COM: Direct (Cross cable)